PC Creative Assembly Frame Test Bench，Open Air Frame Case, DIY Computer Motherboard Case Rack, ITX ATX MATX/EATX Open Aluminum Frame Chassis (EATX)
Roll over image to zoom in
$76.89
Product Description
open computer case-4 models to choose
DIY Computer Motherboard Case Rack for ITX
DIY Computer Motherboard Case Rack for MATX
DIY Computer Motherboard Case Rack for ATX
DIY Computer Motherboard Case Rack for EATX
Superior Heat Dissipation Performance:
Open-air PC cases adopt a design without a fully enclosed shell or with partially open sections, allowing air to flow more freely and providing better heat dissipation. This is particularly important for high-performance computers or users engaging in overclocking, as they typically require better cooling to maintain stability.
Easy Assembly and Maintenance:
Compared to traditional closed cases, open-air PC cases are typically easier to assemble and maintain. With no shell restrictions, users can more easily install and replace hardware components such as CPU coolers, graphics cards, memory, etc.
Unique Appearance and Design:
Open-air PC cases often feature unique appearances and designs, appealing to users who seek personalization and distinctive styles. They offer a different look from traditional cases and can serve as decorative elements on computer desktops.
Reduced Noise Levels:
Due to their superior heat dissipation performance, open-air PC cases typically do not require as many fans for cooling as traditional cases. This results in lower noise levels during operation, providing users with a quieter operating environment.
Showcasing Hardware Configurations:
Open-air PC cases allow users to directly showcase the hardware configurations inside their computers, such as graphics cards, motherboards, and coolers. This is particularly attractive to users who take pride in their hardware configurations or want to showcase their computer builds to others.
Note:
Two PCIE interfaces are configured by default, and the graphics card is installed horizontally, supporting the simultaneous installation of two water-cooled cooling devices.
If the graphics card needs to be installed vertically, additional extension cables are required.The installation position of water cooling can be disassembled with a handle, and the position can be adjusted according to your design.
If the graphics card is too long, you can adjust the water cooling to the top or other position. This design can be very flexible.
egowz open computer case has excellent compatibility. It can support motherboards of EATX, ATX, M-ATX, and ITX types. Support independent graphics card, which requires optional graphics card accessories.
egowz open chassis can support ATX and SFX type power supplies. It can support hard drives of HDD and SSD types. MATX ATX EATX type motherboards can be equipped with 2 PCIE interfaces.
egowz open chassis is made of aluminum alloy material and has a stable vertical structure design. Due to its open design, the heat dissipation effect is excellent. It can support the installation of water-cooled heat dissipation and can support up to 2 installations.
Note: Two PCIE interfaces are configured by default, and the graphics card is installed horizontally, supporting the simultaneous installation of two water-cooled cooling devices. If the graphics card needs to be installed vertically, additional extension cables are required.The installation position of water cooling can be disassembled with a handle, and the position can be adjusted according to your design. If the graphics card is too long, you can adjust the water cooling to the top or other position. This design can be very flexible.
If the CPU is air-cooled, you cannot choose ITX and MATX,because their frames are too short, and the air-cooled CPU will block the graphics card
Customers say
Customers find the computer chassis works well and offers good value for money. They appreciate its design, with one customer noting it’s a nice open-air case, and they like its customization options. The assembly instructions receive mixed feedback, with some customers finding them clear while others say they’re not intuitive. Similarly, the build quality is mixed, with some praising its high construction while others report it breaking almost immediately.
by Michael
Simple & Cheap
This frame is “fine”. It does the job, and is meant for as a test bench frame. I’m using it for my main (mini) ITX computer though. It took me a long time to put together lol, probably an hour or two, the tools are small. I have a 3 slot GPU which this does not work with unless you raise the top frame slightly so it’s not flush. It doesn’t look the best but it works barely. If you have a 3 slot GPU do yourself a favor and get the MATX version and not ITX. Overall I’m happy with the small footprint, but this is a very basic open air frame.
by Cuy
Excellent “Case”
I was considering buying the XTIA open case but for the price difference decided to buy this “test bench” case instead.The quality is great and the experience setting it up was really fun. I would recommend this case to someone looking at something like an “open case”
by Amazon Customer
Exceeded expectations
Didn’t know what to expect when I got this. Pleasantly surprised, if you’ve worked on erector sets, this will be nostalgic for you. Instructions are a little okey, but I assembled pretty quickly. Only real issue I had was the screwdriver tool provided was a little too long, it kept getting in the way during frame assembly.
by Clay L.
Very nice open air case
A bit more complicated than I initially thought, but a very nice aluminum build. Lots and lots of small parts, just take your time and follow the instructions.Worth the price and trouble in the end.
by Buddy Austin
Fun little thing, but could be better
TLDR Pro:- Open platform; versatile (ish)- Plenty of parts/mounting hardwareTLDR Con:- GPU bracket weakness (lack of support bracketry)- Overall dimensions too small (more in “notes” section)- Materials scratch easyExperience:- The instructions are online via QR code. They aren’t the best. Iffy English but you can follow it well since there are pictures. You do get all the parts listed. I ended up with a lot extra since no sata SSDs or remote cooling.- ** When they say to plan out the build before hand, DO IT. The kayak-track mounts need to be inserted into the beam groovesbefore the main frame is secured – you’ll be taking taking it partially apart a lot otherwise (ask me how I know).- For a purpose built mATX chassis aimed at versatility in mounting, it’s a bit limiting (more in “notes” section).- More of a gripe, they provided this nifty little piece of (laminated?) construction paper with a few holes punched out that align with the 3 left-edge screw holes of a mATX motherboard so you can properly align those motherboard posts on the beams. This was nice! … but only for those three posts. Would have been way nicer to have a full template because I had to eyeball the rest.Build quality:- I’ll say middle of the road as a whole. The metal beams are quite nice, but scratch REAL flippin’ easy. The plastic mounty bits are gloss black with protective peel-off stickers. They seem fine. Screws and all threads were solid, no stripping at all.- The two buttons are momentary, non-clicky. Stupid easy to put those on and wire in (they have a dual pin connector).- The plastic end caps to the metal beams don’t really work/fit. As seen in my last 2 images, I banged HARD to try and get at least one in and it still didn’t sit even nearly flush. The last picture shows the plastic damage afterwards. So I won’t be using them.- The GPU bracket is, I guess fine on its own but they didn’t make clear how to best support the GPU on the opposite end. In the vertical position, the bracket can absolutely NOT hold up any more than a single fan GPU without extreme bending. That said, they do supply enough of the plastic mounty things to act as a “shelf”, or “support finger?” lol. In horizontal position, it seems JUST ok. I trust it enough but it’s not confidence inspiring. It’s technically only supported by the two screws at the top of the bracket and the PCIe socket. So… handle with care.Notes:This may be partially subjective as parts and needs may vary, BUT, I think it is 1-2″ too short, and 1-2″ too narrow (depth wise; width is fine) for most modern parts. My particular issue is with the GPU and PSU intercompatibility. In a typical horizontal GPU configuration, my AMD ASUS Strix 5700XT extends 2-3″ past the front edge of the chassis (aka, out from the face of the mobo), and this is even while the PSU is overhanging 1″ on the opposite side (an SFX PSU would probably help, but still result in overhang). It’s not the end of the world but surprising since this is the ONLY way “CPU air cooling” is supported (their chart says vertical GPU doesn’t support CPU air cooling on this chassis). This is a little nuts to me since the dimensions *should* allow for the PSU to be fully within the frame without such a crazy GPU overhang. Which does also lead me call BS on them saying vertical mounting works without air cooling (insinuating AIO/custom water cooling. I have a AMD Stealth here. It is the EXACT same height of my NZXT Kraken X62 pump (popular Asetek AIO; 55mm). I could not imagine ANY way to mount the GPU vertically unless I maybe used an SFX PSU AND made it overhang 2″ MORE (idk if that’s even possible to do with the brackets). I have two images with red boxes to showcase; one where the backet is mounted on top of the beam at the furthest point, the other mounted under the beam (not in instructions, I was just trying different stuff). For the ‘top’ mount, the GPU is too tall and interferes with the CPU cooler (and as I mentioned, it would also interfere with most Asetek AIO pumps). For he ‘under’ mount, it clears the cooler but is then colliding with the RAM (and I have faily low profile ram).I used a standalone verital GPU mount to secure it in the vertical position (not in images since unrelated to the product). So it IS possible and doesn’t impede airflow to the CPU, it sits in front of the fan shroud.
by Eric N Sigala
Good frame for price
Good pc frame i was expecting it to be cheap and flimsy but its pretty sturdy. Does take like 1-2 hours to assemble but after you’re done its pretty satisfying to look at
by P Wheeler
Great deal
This came with all the parts and tools needed to assemble. You will need some mechanical aptitude to assemble this and customize to your specific needs. It worked well for me and I would recommend this kit.
by RKB
Happy overall with the way it turned out
It’s a pretty good kit – got a laugh at some of the instructions, including a picture of a woman doing the assembly, questionably dressed. The CPU coolant lines were a little tricky to route, but overall, I think it turned out well. One ding … almost took away a star for this … the screws for the handle are a little too short, once you factor in the washers … burned some time getting the handle just right. This will probably be going into an arcade cabinet.
by mike leakey
Directions are…odd, but theyll get u there. Skimming through all of them first may save you some time because different set ups require different designs. They purposely leave some directions vague, this is where you’ll need to adjust things to fit.Recommend running your CPU power between the frame and mobo before mobo is installed.I used some 2×2″ panduit finger duct on the backside to keep the cables neat.
by Marius
Very easy to build and very good looking frame for mini itx.Strong ang good quality, all tools is included in package!100% recommendation!
by arvin artajo elumba
What you see is what you get I did order the MATX version quite small for me and building is quite “hard” but you will get use to it. I suggest you get the ATX version if you plan to go for vertical mount GPU. none the less the product is solid overall.
by Mark Fisher
Putting together was a challenge but I expected that it is also very Sturdy and portable.
by Rick
A good frame to hold your all old hardwares into one place after a replacement loop. Especially when you don’t have space for a case.It is not easy to install. Took about 1 hr to put everything together.